Home » Products » Jet Fan Fan » JET FAN AXIAL FANS

JET FAN AXIAL FANS

APPLICATION

Ventilation systems that use axial fans often push the air through the entire park to a single attraction instead of multiple points of attraction as in conventional ventilation systems using pipelines. This allows the system to work with superior flexibility and efficiency.

The Jet fans ventilation system consists of an installed Jet fans system that is mounted on the ceiling to create thrust (according to the jet-based principle) and drive power to the air block in front of the fan.

The use of a Jet fan operation at a large speed creates a large airflow that moves along the rotor shaft. Thus, the flow of gas moves by smoke and emissions to the specified suction point.

The number of & fan installation position is carefully selected to meet the system design requirements and exclude the dead spots accumulated smoke and emissions in the parking area.

 

General Introduction

Jet fans are designed by TOMECO including Axial fan and auxiliary details such as heat-resistant, line-up, protective mesh

General technical characteristics

The TOMECO Jet fans with a wide range of technical features can satisfy most customer requirements:

10 different sizes with wings range from 290 to 500mm..

Small thrust to 5N and largest up to 165N.

The fixed or reversible airflow direction aims to increase the flexibility of design work.

One or two speeds, which are compatible with most inverter products on the market today.

Can work with gas lines under normal conditions or high-temperature smoke.

TECHNICAL CHARACTERISTICS

Operational parameters have been verified by independent assessment units and certification in accordance with EN 12101-3:2002 standards; Tested and certified for heat tolerance in conditions of 300ºC within 1 hour.

Durable operation – long life: Electrostatic drying paint at 200ºC or hot dip galvanized after grease cleansing and phosphate surface enhancement.

Installation of the wing of aluminium alloy made of Aeroflot shape molding, tilting angle can be changed to optimize the dynamic performance of the product.

The dynamic balance on the digital balance machine reaches the ISO 10816 Standard and tests and adjusts vibration with the dynamic equilibrium equipment of American technology.

The fan is equipped with an engine with IP55 protection level, allowing for easy flushing & cleaning with High pressure injector.

The ability to reverse airflow direction: The mounting version with special design can reverse the output of the airflow by reversing the current without affecting the thrust of the fan.

Line direction helps to increase the area of effect of air flow and the performance of the fan.

<

Modern design – with many options such as round version, Oval

Fabrication quality – Manufactured with ISO 9001:2008 standard. 100% of the products were tested before delivering.

The ability to meet the requirements of surface coatings diversity: Customers can specify paint color and coating process products.

Low noise level – quiet operation, ambient friendliness, standard noise level

 

 

 

Sản phẩm liên quan Related products

0917.704.186